aal5mux
aal5snap
aal5dynamic
aal5autoconfig
Select the 3 best answers describing operation and configuration of Frame-Relay Inverse ARP.（）A、Dynamic address mapping uses Frame Relay Inverse ARP to request the next-hop protocol address for a specific connection on its known DLCIB、Responses to Inverse ARP requests are entered in an address-to-DLCI mapping table on the router or access server which is used to supply the next-hop protoco address or the DLCI for outgoing trafficC、Inverse ARP is enabled by default for all protocols enabled on the physical interfaceD、Inverse ARP is configured using the following command under the Interface configuration ’frame-relaymap dlci （dlci number） protocol protocol-address’E、Inverse ARP in Frame-Relay is synonymous of ARP in Ethernet
点击查看答案
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command？（）A、This command should be executed from the global configuration mode.B、The IP address 10.121.16.8 is the local router port used to forward data.C、102 is the remote DLCI that will receive the information.D、This command is required for all Frame Relay configurations.E、The broadcast option allows packets， such as RIP updates， to be forwarded across the PVC
Which configuration command permits dynamic detection of the ATM frame format?（）A、aal5muxB、aal5snapC、aal5dynamicD、aal5autoconfig
Which configuration command represents a static host route in a Routed 1483 network？（）A、iproute 172.10.1.20.0.0.0 atm 6/0.33B、iproute 172.10.1.2255.255.255.0 atm 6/0.33C、iproute 172.10.1.2255.255.255.255 172.10.1.2D、iproute 172.10.1.2255.255.255.255 atm 6/0.33
You would like to configure an ATM PVC with a virtual circuit identifier of 33 on virtual path 0.The PVC should use an unspecified bit rate and be encapsulated in the AAL5SNAP format.Which command accomplishes this goal？（）A、atm pvc0/33 aal5snapB、atm pvc33033 aal5snapC、atm pvc0/33 aal5snap ubrD、atm pvc33033 aal5snap ubr
Which command can be used to verify the DLCI destination address in a Frame Relay static configuration?（）A、show frame-relay end-to-endB、show frame-relay mapC、show frame-relay lmiD、show frame-relay pvc
The command frame-relay map ip 10.121.16.8 102 broadcast was entered on the router. Which of the following statements is true concerning this command（）。A、This command should be executed from the global configuration modeB、The IP address 10.121.16.8 is the local router port used to forward dataC、102 is the remote DLCI that will receive the informationD、This command is required for all Frame Relay configurationsE、The broadcast option allows packets, such as RIP updates, to be forwarded across the PVC
