What is the purpose of limber holes ________.
A.To allow for air circulation
B.To allow for stress and strain in rough waters
C.To allow water in the boat to drain overboard
D.To allow water in the bilge to get to the boat drain
The purpose of inert gas systems aboard tank vessels is to ______.A.allow sufficient oxygen in the tank to sustain lifeB.prevent outside air from entering the tankC.provide increase in cargo discharge pressureD.comply with double hull pollution prevention regulations
点击查看答案
A tank containers should not generally be more than 95% full,______.A.to allow for possible thermal expansion of the contentsB.to prevent dangerous surging movements in transitC.to increase its weightD.to change the free surface in it
Holes in the bulwark,which allow deck water to drain into the sea,are ______.A.DoggersB.FidleysC.Freeing portsD.Swash ports
You have configured the "config network webmode enable" command on a Cisco device. What is the purpose of this command? ()A、To allow HTTP access to the WLAN controllerB、To allow SSH access to the CLI of the WLAN controllerC、To allow SSL access to the CLI of the WLAN controllerD、To allow HTTPS access to the WLAN controllerE、None of the other alternatives apply
A Windows Azure application is activated for Windows Azure Connect A corporate policy blocks Internet traffic for local servers. You need to recommend the firewall rule that will allow Windows Azure Connect traffic for local servers. What should you recommend?()A、 Allow TCP port 443 inbound.B、 Allow TCP port 3389 outbound.C、 Allow TCP port 3389 inbound.D、 Allow TCP port 443 outbound.
What is the purpose of IP Event Dampening?()A、to configure a subinterface so that it can be applied to the primary interface in order to prevent exponential selective dampeningB、to suppress the effects of excessive interface flapping events on routing protocols and routing tables in the networkC、to introduce a nonconfigurable exponential delay mechanismD、to allow the network operator to configure a router to automatically dampen and selectively identify a local interface that is failing
What is the purpose of the cisco Vlan Trunking protocol?()A、to provide a mechanism to dynamically assign vlan membership to switch portsB、to allow traffic to be carried from multiple vlans over a single link between switchesC、to allow native vlan information to be carried over a trunk linkD、to provide a mechanism to manually assign vlan membership to switch portsE、to allow for managing the additions,deletions,and changes of vlans between switchs