AIX V5.2
AIX V4.2
AIX V4.3
AIX V5.1
A hospital customer with an experienced AIX and Microsoft Windows staff wants to consolidate all of their file/print services onto fewer systems. They currently use multiple Microsoft Windows-based Intelsystems that are experiencing reliability problems. They also have POWER4+ systems that are running multiple AIX LPARs that have experienced no reliability issues. They need at least 99.99% uptime. Which solution will meet their uptime needs at the lowest cost？（）A、Combine the file/print servers onto a larger Intel-based machine （x445）.B、Bring up a Linux LPAR on the pSeries and run Samba to provide file/print services.C、Bring up another AIX LPAR on the pSeries and run Samba to provide file/print services.D、Bring up another AIX LPAR on the pSeries and run Connect Direct to provide file/print services.
点击查看答案
A system administrator has just finished upgrading a system to AIX 5.2. If there are future problems， the system administrator would like to add an entry to the AIX errorlog to record this event. Which of the following commands can be issued for this purpose？（）A、/usr/bin/errmsg "System upgraded to AIX 5.2"B、/usr/bin/errlog "System upgraded to AIX 5.2"C、/usr/bin/errupdate "System upgraded to AIX 5.2"D、/usr/bin/errlogger "System upgraded to AIX 5.2"
Which of the following is a key advantage of AIX v5.3 over AIX v5.2？（）A、Dynamic LPARB、Micro-PartitioningC、Small Memory Real ModeD、Capacity Upgrade on demand for memory
Which of the following best describes what is meant by Linux Affinity on AIX？（）A、The ability to install a Linux system on an AIX systemB、The ability to install an AIX system on a Linux systemC、The ability to compile and run a Linux application on AIXD、The ability to compile and run an AIX application on Linux
Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）A、Remove the physical Ethernet adapters from the LPARsB、Activate Advanced POWER VirtualizationC、Update microcode for the virtual adaptersD、Upgrade AIX V5.2 LPAR to AIX V5.3
A large customer is consolidating their pSeries systems onto a p5 590. They will have a requirement for a single device (disk, lun) to have multiple paths through different adapters in a single LPAR. The primary applications were written for AIX 5.2. Which of the following would be the recommended solution to satisfy this requirement?（）A、Assign the adapters to a Virtual IO partitionB、Use the MPIO function included in AIX 5.2C、Migrate the application to AIX 5.3 and use the MPIO functionD、Set up two Virtual IO partitions and attach both partitions to the device
A company plans to deploy a two-enclosure, 23-core Power 780 system with AIX, IBM i and Linux in the following configuration: 3 AIX partitions with dedicated network and disk adapters; 1 native IBM i partition acting as a host; 1 hosted IBM i partition; 2 hosted Linux partitions. Which configuration will provide boot disk capability to all partitions?（）A、Use dual-split backplane in both enclosures for the three AIX partitions and the IBM i partition.B、Put each partition on a dedicated controller using the triple-split backplane option in both enclosures.C、Use the triple-split backplane option in one enclosure for the AIX partitions, and the default dual-split backplane for the IBM i partition in the second enclosure.D、Use the triple-split backplane option in one enclosure for the AIX partitions, and the non-split backplane mode in the second enclosure for the IBM i hosting partition.
