对
错
Generally a hard disk drive has multiple disks, known as ().A、CartridgesB、Spindle motorsC、SectorsD、Platters
点击查看答案
Which of the following errors are caused by leaving a floppy disk in the drive when a computer is powered on?()A、Random bluescreen errorB、Inaccessible boot driveC、Missing NTLDRD、Invalid boot disk
"POST errors in the 600-799 range generally indicate Floppy disk drive errors."
A folder on your Windows 2000 Professional computer contains bitmap files that have been compressed from 2MB to 1MB. You want to copy one of the compressed bitmap files from the hard disk to 1.4-MBfloppy disk. When you attempt to copy, you receive the following error message ‘Destination drive is Full’. What should to do?()A、Move, rather than copy, the compressed bitmap file to the floppy disk.B、Reformat the floppy disk.Then copy the compressed bitmap file to the floppy disk.C、Use another program to compress the bitmap file before copying it to the floppy disk.D、Copy an empty compressed folder to the floppy disk. Then copy the compressed bitmap file to the folder on the floppy disk.
A technician replaced a floppy drive and now the front indicator light is consistently illuminated.Which of the following is the cause for this?()A、It is a feature of new floppy drives.B、The data cable was put on backwards.C、A disk is being read by the floppy drive.D、The new floppy drive is defective.
Which of the following will occur if a laptop SATA 1 drive is installed on a SATA 2 controller?()A、The drive will run at the lower SATA 1 speed.B、The drive will not work due to incompatibility.C、The drive will run at the higher SATA 2 speed.D、The drive will have intermittent POST errors.
A computer has been upgraded with a new hard drive and after reassembling the computer and turning the computer on, the drive LED remains lit and an error message during power-on self test (POST) states, ’No Drive Present.’ Which of the following would MOST likely be the cause?()A、The motherboard was damaged and needs replacing.B、The floppy drive was not reconnected.C、A configuration disk was left in the floppy drive.D、The ribbon cable has been installed incorrectly.