NAT一般的出现在下列哪些载体上?()
NAT一般会应用在()上。A.路由器B.纯软件应用C.硬件防火墙D.交换机E.网桥
点击查看答案
路由器配置中,下列()命令不是用来显示路由器上的发生实时地址转换信息的命令。A、show ip nat translationsB、show ip nat statisticsC、debug ip natD、clear ip nat translationE、clear ip nat translation *
在路由器配置中,基于端口的NAT又被称为()。A、快速NATB、静态NATC、过载NATD、静态过载
中国的IPv4地址稀缺,在校园网中广泛采用()。A、动态NATB、静态NATC、基于端口的NATD、基于协议的NAT
以下哪种网络地址转换允许一台位于公共网络的主机可持续访问一台指定的内部主机()A、基于端口的NATB、静态NATC、动态NATD、NAT过载
NAT功能通常体现于()设备中A、路由器B、防火墙C、单独的NAT设备D、二层交换机
A Cisco router has been configured with the following command:IP nat pool nat-test 192.168.6.10 192.168.6.20 netmask 255.255.255.0his is an example of what type of NAT?()A、Static NATB、Dynamic NATC、Dynamic NAT with overloadD、Port Address TranslationE、None of the above