Which type of source NAT is configured in the exhibit？（） [edit security nat destination] user@host# show pool A { address 10.1.10.5/32； } rule-set 1 { from zone untrust； rule 1A { match { destination-address 100.0.0.1/32； } then { destination-nat pool A；

题目

Which type of source NAT is configured in the exhibit？（） [edit security nat destination] user@host# show pool A { address 10.1.10.5/32； } rule-set 1 { from zone untrust； rule 1A { match { destination-address 100.0.0.1/32； } then { destination-nat pool A； } } }

A、static destination NAT
B、static source NAT
C、pool-based destination NAT without PAT
D、pool-based destination NAT with PAT

更多“Which type of source NAT is configured in the exhibit？（） [edit security nat destination] user@host# show pool A { address 10.1.10.5/32； } rule-set 1 { from zone untrust； rule 1A { match { destination-address 100.0.0.1/32； } then { destination-nat pool A； ”相关问题

第1题

Which statement describes the behavior of source NAT with address shifting？（）A、Source NAT with address shifting translates both the source IP address and the source port of a packet.B、Source NAT with address shifting defines a one-to-one mapping from an original source IP address to a translated source IP address.C、Source NAT with address shifting can translate multiple source IP addresses to the same translated IP address.D、Source NAT with address shifting allows inbound connections to be initiated to the static source pool IP addresses.

点击查看答案
第2题

Which command is needed to change this policy to a tunnel policy for a policy-based VPN？（） [edit security policies from-zone trust to-zone untrust] user@host# show policy tunnel-traffic { match { source-address local-net； destination-address remote-net； application any； then { permit； } }A、set policy tunnel-traffic then tunnel remote-vpnB、set policy tunnel-traffic then permit tunnel remote-vpnC、set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn permitD、set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn

点击查看答案
第3题

A network administrator wants to permit Telnet traffic initiated from the address book entry the10net in a zone called UNTRUST to the address book entry Server in a zone called TRUST. However, the administrator does not want the server to be able to initiate any type of traffic from the TRUST zone to the UNTRUST zone. Which configuration statement would correctly accomplish this task?（）A、from-zone UNTRUST to-zone TRUST { policy DenyServer { match { source-address any; destination-address any; application any; } then { deny; } } } from-zone TRUST to-zone UNTRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }B、from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then {deny; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }C、from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match { source-address the10net; destination-address Server; application junos-ftp; } then { permit; } } }D、from-zone TRUST to-zone UNTRUST { policy DenyServer { match { source-address Server; destination-address any; application any; } then { permit; } } } from-zone UNTRUST to-zone TRUST { policy AllowTelnetin { match {source-address the10net; destination-address Server; application junos-telnet; } then { permit; } } }

点击查看答案
第4题

Which two statements are true about pool-based destination NAT？（）A、It also supports PAT.B、PAT is not supported.C、It allows the use of an address pool.D、It requires you to configure an address in the junos-global zone.

点击查看答案
第5题

Which configuration shows the correct application of a security policy scheduler?（）A、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } scheduler-name now; } } }B、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }C、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn scheduler-name now; } } } }D、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; scheduler-name now; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }myTunnel;

点击查看答案
第6题

Which statement is true about a NAT rule action of off？（）A、The NAT action of off is only supported for destination NAT rule-sets.B、The NAT action of off is only supported for source NAT rule-sets.C、The NAT action of off is useful for detailed control of NATD、The NAT action of off is useful for disabling NAT when a pool is exhausted.

点击查看答案
第7题

Your task is to provision the Junos security platform to permit transit packets from the Private zone to the External zone by using an IPsec VPN and log information at the time of session close.Which configuration meets this requirement?（）A、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts;destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; } } log { session-init; } } }B、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; } } count { session-close; } } }C、[edit security policies from-zone Private to-zone External] user@host# showpolicy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN;} } log { session-close; } } }D、[edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn VPN; log; count session-close; } } } }

点击查看答案

Which type of source NAT is configured in the exhibit？（） [edit security nat destination] user@host# show pool A { address 10.1.10.5/32； } rule-set 1 { from zone untrust； rule 1A { match { destination-address 100.0.0.1/32； } then { destination-nat pool A；

题目

更多“Which type of source NAT is configured in the exhibit？（） [edit security nat destination] user@host# show pool A { address 10.1.10.5/32； } rule-set 1 { from zone untrust； rule 1A { match { destination-address 100.0.0.1/32； } then { destination-nat pool A； ”相关问题

第1题

第2题

第3题

第4题

第5题

第6题

第7题

相关内容