After a technician installs a new CMOS battery on a motherboard, which of the following will thetechnician have to change? （）
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive. After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website. Which action should the technician take next？（）A、 backup the BIOS configuration to use laterB、 install the BIOS update from a command promptC、 create a bootable floppy and copy the BIOS update tools to the floppyD、 read the manufacturer’s guidelines and recommendations on installing the update
点击查看答案
Which of the following components could MOST likely cause Mike, a technician, to receive a ‘Nonsystem disk or disk error’ after POST?（）A、Bad memoryB、Video cardC、Faulty chipsetD、FDD
A technician（技术） has a current baseline（基准线） and is told to install additional（添加） memory and a faster NIC card. At which point in time should the next baseline be run？（）A、 After the memory is installedB、 Before the upgrade is performedC、 After the NIC is installedD、 After the upgrades are performed
Under which of the following circumstances would a technician use IPCONFIG /RENEW?（）A、After an unsuccessful rebootB、If a user’s IP address has been spoofedC、After using IPCONFIG /RELEASED、If the computer has an ARP address conflict
A user requires more storage space on their computer. After a technician installs a second IDE drive in the computer, the system will not recognize that there are any hard drives installed. Which of the following is the MOST likely cause of the problem?（）A、The second hard drive has not been formatted for NTFS.B、The jumpers on both drives are set to the cable select position.C、The jumper on the first drive is set to master and the second is set to slave.D、The jumpers on both drives are set to the master position.
A technician installs a local web server which is not accessible from the network. Which of the following is the local IP address that the web server should be using on the loopback adapter?（）A、127.0.0.1B、172.31.146.1C、192.168.1.1D、10.1.1.1
A technician installed a new application on a Windows XP desktop. After the application wasinstalled, the technician rebooted the desktop and received a bluescreen error. Which of thefollowing steps should the technician perform?（） (Select TWO).A、Boot into Safe ModeB、Replace the motherboardC、Uninstall the applicationD、Replace the hard driveE、Install more RAM
