During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）A、Because of damaged flash memory， the router will fail the POSTB、It will attempt to locate the IOS from a TFTP server. If this fail

题目

During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）

A、Because of damaged flash memory， the router will fail the POST
B、It will attempt to locate the IOS from a TFTP server. If this fails， it will initiate the setup dialog.
C、It will attempt to locate the IOS from a TFTP server. If this fails， it will load a limited IOS from ROM
D、It will attempt to locate the configuration file from a TFTP server. If this fails， it will initiate the setup dialog.
E、It will attempt to locate the configuration file from a TFTP server. If this fails， it will load a limited configuration from ROM

更多“During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）A、Because of damaged flash memory， the router will fail the POSTB、It will attempt to locate the IOS from a TFTP server. If this fail”相关问题

第1题

A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?()A.It checks the configuration registerB.It attempts to boot from a TFTP serverC.It loads the first image file in flash memoryD.It inspects the configuration file in NVRAM for boot instructions

点击查看答案
第2题

There are no boot system commands in arouter configuration in NVRAM.What is the fallback sequence that router will use to find an ios during reload?()A.Flash,TFTPserver,ROMB.Flash,NVRAM,ROMC.ROM,NVRAM,TFTP serverD.NVRAM,TFTP server,ROME.TFTP server,Flash,NVRAM

点击查看答案
第3题

During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next()。A.Because of damaged flash memory, the router will fail the POST.B.It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog.C.It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM.D.It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog.E.It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.

点击查看答案
第4题

There are no boot system commands in a router configuration in NVRAM.What is the fall back sequence that router will use to find an ios during reload?()A.Flash，TFTPserver，ROMB.Flash，NVRAM，ROMC.ROM，NVRAM，TFTPserverD.NVRAM，TFTPserver，ROME.TFTPserver，Flash，NVRAM

点击查看答案
第5题

You need to upgrade the IOS of an existing router on your network. The new IOS image is located on a TFTP server that you have set up within the network. What command should you issue in order to download the new IOS version?（）A、Router# copy tftp flashB、Router# copy flash runC、Router(config)# restore flashD、Router(config)# repair flashE、Router#copy flash tftpF、Router# copy start flash

点击查看答案
第6题

Exhibit: The following are true with one of the TestKing routers: 1) The IOS image in flash is missing 2) No Network connectivity is available. 3) The router fallback IOS image is corrupt. How will this Cisco 2600 series router respond if the conditions listed in the exhibit exist during the boot process?（）A、The router will enter setup mode.B、The router will enter ROM monitor mode.C、The router will enter global configuration mode.D、The boot will hang until an IOS is available.

点击查看答案
第7题

When upgrading the IOS image, the network administrator receives the exhibited error message. What could be the cause of this error?（）A、The new IOS image is too large for the router flash memory.B、The TFTP server is unreachable from the router.C、The new IOS image is not correct for this router platform.D、The IOS image on the TFTP server is corrupt.E、There is not enough disk space on the TFTP server for the IOS image.

点击查看答案

During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）A、Because of damaged flash memory， the router will fail the POSTB、It will attempt to locate the IOS from a TFTP server. If this fail

题目

更多“During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）A、Because of damaged flash memory， the router will fail the POSTB、It will attempt to locate the IOS from a TFTP server. If this fail”相关问题

第1题

第2题

第3题

第4题

第5题

第6题

第7题

相关内容