Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?()
In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?()A、Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.B、A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.C、A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.D、A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.
点击查看答案
Select the three features common to the majority of switches in the Cisco Small Business portfolio.()A、Quality of ServiceB、Power over EthernetC、VLAN supportD、Layer 3 functionsE、 stacking optionsF、firewall support
In an enterprise setting, access switches providing network connectivity placed throughout abuilding are typically connected to a backbone called the:()A、MDFB、ProxyC、Demarcation pointD、Smart jack
Which of the following offers the highest level of redundancy in the design of a storage system?()A、 A Dual Port HBA with a pair of Point-To-Point connections to the SAN.B、 Two Single Port HBAs connected to a fiber switch.C、 A Dual Port HBA with a Point-To-Point connection to a SAN.D、 Two Dual Port HBAs connected to a pair of fiber switches.
Two switches are connected through a trunk link.which two commands show that there is a native VLAN mismatch on that link?()A、show interfaces interfaceB、show vlan briefC、show interfaces interface switchportD、show interface interface trunkE、show interfaces vlan
An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?()A、The switch that will share its VLAN configuration must be in VTP server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be connected over VLAN trunks.E、The switches must be configured to use the same STP version.F、The switches must have VTP pruning activated.
A new switch is installed in the Testking network. This switch is to be configured sothat VLAN information will be automatically distributed to all the other Cisco Catalyst switches in the network. Which of the conditions below have to be met in order for this to occur?()A、The switch that will share the VLAN information must be in the VTP Server mode.B、The switches must be in the same VTP domain.C、The switch that will share the VLAN information must be configured as the root bridge.D、The switches must be configured to use the same VTP version.E、The switches must be configured to use the same STP version.F、The switches must be configured to use the same type of ID tagging.G、The switches must be connected over VLAN trunks.