What bit should be set in the link state PDUs in an IS-IS level-1-2 router to indicate that they are a potentialexit point out of the area ？（）
What is the flooding scope of an OSPFv3 LSA， if the value of the S2 bit is set to 1 and the S1 bit is set to 0？（）A、link localB、area wideC、AS wideD、reserved
点击查看答案
A technician needs to build a server with at least 16GB of RAM and Windows 2008R2 as the operating system. Which of the following processors should the technician choose？（）A、32-bit AMD processorB、32-bit Intel P4 processorC、64-bit Intel processorD、64-bit ARM processor
What is the advantage of using DTX for an MS? （）A、Increases battery lifeB、Better Bit Error Rate (BQRE)C、Higher strengthD、Increased bit rateE、Better voice quality
A user reports that they cannot cd to /tmp/application. A system administrator entered the following command： （1）ls -ld /tmp/application （2）drw-r--r-- 4 root system 512 Jan 15 14：09 application What is the most likely cause of the problem？（）A、The /tmp/application should be globally writable.B、The /tmp/application directory should be executable.C、The /tmp/application directory should be owned by the user.D、The /tmp/application directory should have the sticky bit set.
SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）A、SLES does not perform well with DHCPB、SLES was installed with the default host name of LinuxC、Virtual Network Resources are being used, which is not supported in a SLES environmentD、The SLES instance was installed in 32-bit mode, where 64-bit should have been selected
You.create Windows.Forms.applications.by.using.the .NET Framework 3.5. You plan to use the Windows Installer to deploy a new application. The application must meet the following requirements： （1）Support deployment to 32bit and 64bit operating systems （2）Use the 64bit Program Files folder when deployed to 64bit platforms You need to ensure that the application is deployed appropriately. What should you do？（）A、Create a single MSI file.Add a launch condition that is set to Version NT64B、Create a single MSI file.Add a launch condition that is set to NOT Version NT64C、Create an MSI file that is targeted to 64bit platforms.Create an MSI file that is targeted to 32bit platformsD、Create a single MSI file.Create a merge module that contains the 32bit and 64bit code
Your company has recently deployed a server that runs Windows Server 2008. The server has the IP information shown below. IP address 192.168.46.186 Subnet mask： 255.255.255.192 Default gateway： 192.168.46.1 Users on remote subnets report that they are unable to connect to the server. You need to ensure all users are able to connect to the server. What should you do？ （）A、 Change the IP address to 192.168.46.129B、 Change the IP address to 192.168.46.200C、 Change the subnet mask to a 24-bit maskD、 Change the subnet mask to a 27-bit mask.
