每个“IP Access Host GPB”最多有几个IP地址（）
只封禁一台地址为192.168.1.230主机的access-list正确配置是 (5) 。 A．access-list 110 permit中anyany access-list 110 deny中host 192.168.1.230 any access-list 110 deny ip anyhost 192.168.1.230B．access-list 110 deny中host 192.168.1.230 any access-list 110 deny中any host 192.168.1.230 access-list 110 permit ip anyanyC．access-list 110 deny ip host 192.168.1.230 any access-list 110 deny ip any host 192.168.1.230D．access-list 110 deny ip host 192.168.1.230 any access-list 110 permit ip anyany access-list 110 deny ip any host 192.168.1.230
点击查看答案
完成以下ACL配置，实现总部主机10．0．1．3和分支机构主机l0．0．2．3的通信。R1(eonfig)access-list 110 permit ip host(11)host(12)R2(config)}}access-list 110 permit ip host(13)host 10．0．1．3
ACL默认执行顺序是(5)，在配置时要遵循(6)原则、最靠近受控对象原则、以及默认丢弃原则。(5)、(6)备选项(A)最大特权(B)最小特权(C)随机选取(D)自左到右(E)自上而下(F)自下而上=2．要禁止内网中IP地址为192.168.46.8的PC机访问外网，正确的ACL规则是(7).(A)access-list 1 permit ip 192.168.46.00.0.0.255 anyaccess-list 1 deny ip host 192.168.46.8 any(B)access-list 1 permit ip host 192.168.46.8 anyaccess-list 1 deny ip 192.168.46.00.0.0.255 any(C)access-list 1 deny ip 192.168.46.00.0.0.255 anyaccess-list 1 permit ip host 192.168.46.8 any(D)access-list 1 deny ip host 192.16.46.8 anyaccess-list 1 permit ip 192.168.46.00.0.0.255
Your security policy requires that users authenticating to the Junos Pulse Access Control Service are connecting from a domain member endpoint on the internal corporate network.Which set of role access restrictions must you configure to enforce this security policy?（）A. Source IP and browserB. Source IP and certificateC. Certificate and Host CheckerD. Host Checker and source IP
只封禁一台地址为193．62．40．230主机的access-1ist的正确配置是（ ）。A.acess-list 110permit ip any anyaccess-list 110 deny ip host 193．62．40．230 anyaccess-list 110 deny ip any host 193．62．40．230B.access-list 110 deny ip host 193．62．40．230anyaccess-list110 deny ip any host 193．62．40．230access-list 110 permit ip any anyC.access-list 110 deny ip host 193．62．40．230 anyaccess-list110 deny ip any host 193．62．40．230D.access-list 110 deny ip host 193．62．40．230 anyaccess-fist 110permit ip any anyaccess-list 110 deny ip any host 193．62．40．230
Which profile configuration command dynamically creates a host route in the routing table?()A.ip host routesB.ip access-routesC.host routes enabledD.access-routes enabled
In a PPP over ATM service offering,which command inserts the user's host route into the routing table?()A.ip host-routeB.ip access-routesC.ip dynamic host-routeD.ip route access-routes
