THE MASTER WHEN CALL TO THE BRIDGE AND TAKING OVER THE CONN FROM THE OFFICER OF THE WATCH ，SHOULD SAY：YOU NOW HAVE THE CONN。
It should be observed ______ the master is not bound to show both the number of packages and the weight．A.thatB.whichC.whereD.when
点击查看答案
Did anyone call me when I was out?A:invite B:name C:answer D:phone
Did anyone call when I was out?A:everyone B:someone C:nobody D:anybody
起货机出故障时，水手要去叫电工来修理。（）A、When the windlass is in trouble, the sailor must go and call the electrician to repair it.B、When the derrick is in trouble, the sailor must go and call the electrician to repair it.C、When the winch is in trouble, the sailor must go and call the electrician to repair it.D、When the winch is in trouble, the sailor must go and call the carpenter to repair it.
Which statement is true about a distributed call control environment and the processing of dialed digits from an IP phone？（）A、The router that is directly connected to the IP phone will look up the called number in its call routing table.B、The router that is directly connected to the IP phone will inform its call agent when a service request is detected.C、When the IP phone is picked up，the IP phone initiates the service request.D、The directly connected router passes the collected digits to its call agent，and the call agent looks up in its call-routing table the called number.
Which statement describes the call behavior of the Cisco Unified Wireless IP Phone 7921G when it roams from 802.11b to 802.11a?（）A、The phone does a directed call hangup on 802.11b，then does an auto-redial on 802.11a，creating a new call.B、The phone does a directed call hangup on 802.11b， then the user does a redial on 802.11a，creating a new call.C、The phone does a disassociation on 802.11b and an association on 802.11a，and call remains up if the subnet has not changed.D、The phone does not roam from 802.11b to 802.11a when on an active call.E、The phone must switch network profiles to roam from 802.11b to 802.11a.
For NIM to install client machines located in a non-adjacent network， which routing must be defined？（） A、Boot/install servers will be required on each intermediate network.B、When an install is initiated by the client， routing is only required from the LPAR back to the NIM master.C、When an install is initiated by the NIM master， routing is only required from the NIM master to the client.D、Appropriate network NIM resources need to be defined to the NIM master to allow routing in both directions.
